Free economy shipping on all orders
Our policy lasts for a period of 14 DAYS. Kindly note that if 14 days have passed since your date of receiving the package, our team will not be held liable for it and thus cannot help with refunds and exchanges.
Condition: |
New |
Warranty: |
Yes |
Manufacturer Part Number: |
|
Interchange Part Number: |
140-589-15-21 140-589-15-21-001405891521 DIP STICK |
Other Part Number: |
917-321 917321 INDICATOR GAUGE LEVEL MEASURE |
AutomaticTransmission Fluid Level Dipstick Tool
for Mercedes Benz /Sprinter +
Specifications:
1)Specificallydesigned to check automatic transmission fluid level
2)Replaces: MERCEDESpart numbers: 140-589-15-21, 140-589-15-21-00, 1405891521, 140589152100
How to use:
1)Insert intodipstick tube until the tool bottoms out. (The tab at the bottom of the tool will stop the tool when it's in all theway.
2)Do not force it infurther in!
3)As perMercedes/Maybach/Sprinter > On some models this tool may be longer than thetube itself.
4)Remove and checkfluid level
DO NOT leave tool inside the dipstick tube when finished with level check.
Picture above showsactual part for reference.
1. Verify that the vehicle is parked on a level surface.
2. Remove dipstick tube cap.
3. Engage parkingbrake. Start engine and let it idle with gear selector in the park position.
4. Shift the transmission lever through the gears several
times with the vehicle stationary and engine idling.
5. Bring the vehicle up to operating temperature and check fluid level with engine idling. Push dipstick into transmission fill tube until it bottoms out against the transmission pan and pull out, read fluid level.
Note:The dipstick will protrude from fill tube when installed
6. Check transmission fluid temperature using a scan tool
Note:Accurate transmission fluid temperature can only be obtained by using a scan tool with the transmisson leber in reverse or any forward gear positon.
7. The transmission dipstick has level indicator lines every 10mm,Check fluid level on dipstick; Determine proper fluid level using the correct fluid level chart for your vehicle.
8. Adjust fluid level as necessary and recheck level.
9. Install dipstick tube cap after checking fluid level.
Thanks for subscribing!
This email has been registered!