DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V
DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V
DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V
DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

$89.00
$89.00

Free Shipping

Free economy shipping on all orders

Easy returns

Learn More.
DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

$89.00

DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

$89.00

DUOYI DY18 Car Circuit Tester Power Probe Automotive Diagnostic Tool Electrical Current Voltage Scanner Tool 6-24V

Description:
-It is a comprehensive6-24V DC test kit.
-Its long cable makes your testing easily.
-It allows you to track and locate short circuits.
-It can also test for continuity with the assistance of its auxiliary ground lead.
-The unit has short-circuit protection and can test for bad ground contacts instantly.

-The unit is the best electrical tester for reducing diagnostic time in automotive electrical systems.
-After a simple hook-up of the unit to the vehicle's battery, automotive technician can conduct a positive or negative battery
current to the tip by rocking the power switch forward or backward.
-Overload Protection ---Buzzer Warning.The test pen has overload power-off protection. If the current is too large or the load
is too heavv during the power distribution process.the test pen will be disconnected to protect the battery and a beep warning.
-Double Insulation Protection. Safe and reliable measurement The instrument uses insulation material national safety
compulsory certification (CCC).

Specification:
Brand Name: Duoyi
Model Number: DY18
Name: Circuit Finder Tester
Operation Voltage: 6-24V DC
Material Type: plastic and metal
Item Width: 20mm/0.79inch
Item Length: 220mm/8.66inch
Lead Length: approximately 4M /157.5inch
Item Type: Electrical Testers & Test Leads
Overload protection: 8A (When the current exceeds 8A, this item will disconnect the current automatically.)
Function : Polarity Testing / Continuity Testing /Testing Components in Vehicle's Electrical System / Grounding Testing
/ Short Circuit Following and Locating / Checking Short Circuit
Automatic Identification of Positive and Negative:
-LED light prompt, quickly identify positive and negative
-LED light is bright green, Indicates the probe output positive voltage or the probe test is the negative voltage.
-LED light is red, Indicates that the probe outputs a negative voltage or the probe is tested as a positive voltage.
Testing:
1.Polarity Testing
This tool can test uncertain polarity of contact in the circuit of vehicle.
-Unroll the leads
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-Contact the probe tip to a positive (+), the LED should light RED.
-Contact the probe tip to a negative (-), the LED should light GREEN.
2. Continuity Testing
-Unroll the leads.
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-Connect auxiliary ground lead to one side of tested wire along with probe tip connecting to the other side. When
continuity is present,the LED will light GREEN. If LED does not light up, no continuity present.
3.Testing Components Out of Vehicle's Electrical System
-Unroll the leads.
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-Connect auxiliary ground lead to negative terminal of tested component.
-Press button to (-) side with LED lighting RED. Contact the probe tip to positive terminal of tested component to
active the component.If LED turns to GREEN with buzzer sounding, stop testing and check the component if defective
or not, or rating current of component is higher than that of this tester.
4. Testing Components in Vehicle's Electrical System
-Unroll the leads.
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-When component' scontrol switch is located at the side of positive terminal of component, press button to "-" side to
have LED light RED. Contact probe tip to the positive terminal of component.The component will be activated.
5. Jumper Lead Operation
The black clip and auxiliary ground lead are connected directly through the unit. User can consider it as a long jumper
test lead by leave the red clip disconnected from the battery.
6. Jumper Lead Operation
For some components of which neqative terminal is required to be well grounded for large current fowing, this tester
is a good tool to test their grounding.
-Unroll the leads.
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-Press button to"-"side, the LED should light RED, and positive voltaqe is supplied. Then have the probe tip quickly contact
negative terminal of component as dose as possible, LED indicator turns to GREEN with buzzer sounding, which means it
is well grounded. If NOT, the LED remains RED without any buzzer.
7. Short Circuit Following and Locating
-Unroll the leads.
-Connect red clip to positive terminal of vehicle's battery.
-Connect black clip to negative terminal of vehicle's battery.
-Press button to "-" side, the LED should light RED, and positive voltage is supplied.
-Remove the blown fuse from the fuse box and begin trackinq from two terminals of the fuse socket.Use probe tip quickly
contact wire. If LED lights GREEN with buzzer, short circuit or overloading component appears in this side. Please note this
wire' s color or identification code. Follow the wire as far as you can alonc the wiring harness. Locate the color-coded wire in
the harness and expose it. Cut the wire. Follow the wire in the shorted direction and repeat this process until the short is located.
If there are components in the following wire, check the components individually if good or not.
Note:
1. Do not use on AC voltage.
2. Don't use it if it is damaged.
3. Don't use this item when driving.
4. Before driving, please always make sure that the vehicle is safe and reliable.

5. The unit is not to be used with 110/220V house current, it is only use for DC 6~24V systems.
6. After you finishing checking vehicle, correctly restored all the connection-s which you disconnected.
7. Never touch any dangerous part of the vehicle with your hand for safety. Don't touch any live conductor with hand or skin.
8. Do not use the item around explosive gas, vapor, or dust. When the power switch is pressed (or rocked), battery current is
conducted directly to the tip which may cause sparks when contacting ground or certain circuits.
9. Always follow the instructions and procedures indicated in the vehicle's service manual before attempting to disconnect any
part or subsystem of the electrical circuit.
10. Some components of vehicle work on low voltage, they cannot withstand the voltage allied by the item. To avoid damage for
these components, don't use the item to apply voltage directly or indirectly.
Package Included:
1 X Circuit Tester
1 X User Manual (in English)


Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.

Related Products

Recently Viewed Products