Universal Tire Inflator Hose with Locking Air Chuck for Cars & Bikes

A short inflator hose with a locking air chuck that stays on the valve while you pump, so you are not holding the connector in place or losing air. Keep it in the trunk with your pump or compressor for quick top-ups on cars, motorcycles and bikes.

Highlights

• Locking air chuck holds an air-tight seal on the tire valve during inflation
• Twist-on connection for easy attaching and removing
• Lightweight at about 64 g — easy to store in a glovebox or tool bag
• Useful as a replacement or extension hose for many tire inflators

Specifications

• Weight: approx. 64 g
• Chuck: locking air chuck, twist-on
• Color: black

Before you order

This is a hose and chuck only — it does not include a pump or compressor. Compare the threaded fitting on the hose with the outlet on your inflator in the product photos. Most cars and motorcycles use Schrader-type tire valves; some bicycles use Presta valves, which need an adapter.

How to use

1. Connect the hose to your pump or compressor.
2. Remove the valve cap and press or twist the chuck onto the tire valve until it locks.
3. Inflate to the pressure shown on the sticker inside your driver's door, checking with a gauge.
4. Release the chuck and replace the valve cap.

FAQs

Does it work on bicycle tires?
It fits Schrader valves directly. For Presta valves you will need a Presta-to-Schrader adapter.

Is a pump included?
No, this listing is for the hose with locking chuck only.