YAWOA YA201 ODB2 Scanner Car Diagnostic Scan Tool Auto OBDII Engine Fault Code Reader Battery Tester PK CR3001
- ¥11,500
- ¥11,500
- Unit price
- per
Free Shipping
Free economy shipping on all orders
Easy returns
Learn More.
YAWOA YA201 ODB2 Scanner Car Diagnostic Scan Tool Auto OBDII Engine Fault Code Reader Battery Tester PK CR3001
Functions:
1.Diagnostic Functions
2:Read codes
3.Erase Codes
1)All Datastream:
3)Record
1.Diagnostic Functions
Use this function to select a vehicle and then proceed to the diagnostic Menu.
2:Read codes
Reads DTCs from vehicles computer with Koeo or KOE.
3.Erase Codes
Deletes dtcs from vehicle s memory.
4.Live Data
Live Data menu lets you view, record and playback real time PIDs data from the electronic control mod.
In live data menu, you can insert the selected item to front by holding pressing the "ok" key for 3 seconds.
1)All Datastream:
Views vehicle Parameter Identification Data(PIDs)in real time PIDs are displayed in either a text format or graph format when
available.
2)Graph Display
2)Graph Display
Show the live data via graph mode, selecte PIDs by "OK" key, enter the graph by "Return"key switch the PIDs by "UP"and "Down"key.
3)Record
Record the PIDs frame, selecte PIDs by "OK" key,enter the record page by "Return" key. Select the storage slot location to start record.
4)Playback
Choose the record slot to playback the live data, switch frame by"UP" and "Down" key.
5.Freeze Frame
Displays Screenshots of operating conditions at the time of a fault.
6.Vehicle Info
Scan tool displays the vehicle's VIN number, Calibration ID (s) and CVNthat identify the software version in the vehicles control module (s.)
The tool also displays In-Use Performance Tracking of importantreadiness monitors.
The tool also displays In-Use Performance Tracking of importantreadiness monitors.
7.Component Test
Tool will display a list of components and their locations on the vehicle.This function will always appear on the Main Menu.
This selection will appear on the Diagnostic Menu only when the toollhas a list of component locations for the currently selected vehicle.
8.On-Board Monitoring
Scan tool controls the operation of vehicle components, tests or systems.
9.On Sensor Test
Displays oxygen sensor monitoring test results from the vehicle's memory,the O2 Monitor Test is NOT an ON-DEMAND TEST.
10.I/M Readiness
Displays Screenshots of the state of the vehicle's OBDII Monitors.
DTC Look Up
Looks up definitions of DTCs stored in scan tool, and shows the possiblecauses of the DTC. (NOt every DTC with possible causes reason)
Battery
Display battery condition, Max value Min value by graph in real time
Option
Changes tool option displays tool information, and performs tool self-tests.
Languages
Allows the user to change the language used by the tool. English is default.
Unit
Changes measurement units display metric or imperial.
Data Logging
Turn on /off the data log function to record the device data through vehicle.
Self-test
Display Test
Used to check the display screen.
Keyboard Test
Verifies that the keys are working correctly.
How to use ?
Locating Data Link Connector
1.Choose a location under driver side dash under steering wheel and use that description in both places.
2.If unsure about location of dlc, check vehicl manual or reputable service center about location
Connect the tool:
1.If the connector is not there a label should be there indicating the whereabouts of the connector.
2:If necessary, remove the cover from the DLC
3.Turn the ignition switch to the on position. Do not start the engine
4.Plug the OBD connector into the Data Link Connector.
5.The tool will attempt to identify the vehicle. If successful, the vehicle identifie lisplayed. if the vehicle cannot be identified, menus will be
shown for you to select the vehicle manually.
How to use ?
Locating Data Link Connector
1.Choose a location under driver side dash under steering wheel and use that description in both places.
2.If unsure about location of dlc, check vehicl manual or reputable service center about location
Connect the tool:
1.If the connector is not there a label should be there indicating the whereabouts of the connector.
2:If necessary, remove the cover from the DLC
3.Turn the ignition switch to the on position. Do not start the engine
4.Plug the OBD connector into the Data Link Connector.
5.The tool will attempt to identify the vehicle. If successful, the vehicle identifie lisplayed. if the vehicle cannot be identified, menus will be
shown for you to select the vehicle manually.
Top 5 Reason to Choose YA201:
1. Free Upgrade Life Time : Just Put in the USB and Paste the files into Flash disk
2. Data stream sorting
3. Find The Cause Of The Fault Code
4. Support 12V vehicles 1996 &newer (OBDII & CAN)
5. YA201 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
6. Multi-Language: English, French, Russian, Spanish, German, Italian, Portuguese, Japanese, Chinese
Specifications:
2. Data stream sorting
3. Find The Cause Of The Fault Code
4. Support 12V vehicles 1996 &newer (OBDII & CAN)
5. YA201 provides full OBDII/EOBD diagnostic functions and meets protocols such as ISO9141-2, ISO14230-4, SAEJ1850, and ISO15765-4.
6. Multi-Language: English, French, Russian, Spanish, German, Italian, Portuguese, Japanese, Chinese
Specifications:
| Brand: |
YAWOA |
| Model: |
YA-201 |
| Product: |
ODB2 Scanner |
| Material: |
PVC material |
| Screen: |
2.4 inch TFT color screen |
| Screen Resolution: |
320*240 |
| Connector: |
OBD2 standard connector |
| Voltage: |
9-16V DC |
| Working Temperature: |
-10℃~+40℃ |
| SIze: |
5.4*2.9*0.9 inch |
| Cable Length: |
31.5 inch |
| Keys: |
4 keys(OK /Back/Up/Down) |
| Weight: |
200g |
Fitment:
Support cars that support OBD2 protocols.
NOTE:
* To review I/M Readiness status,make sure that the ignition key is switched to ON with the engine off.
* Not all monitors are supported by all vehicles.There are two types of l/M Readiness tests:
* since DTCs Cleared -shows status of the monitors since the DTCs werelast cleared.
* This Drive Cycle-shows status of monitors since the start of the currentdrive cycle.
Package Included:
1* YA201 ODB2 Scanner
1* English User Manual
Please allow 7 - 15 business days for your order to arrive. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Our policy lasts 14 days. If 14 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Related Products
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Recently Viewed Products
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
Example product title
- ¥11,500
- ¥11,500
- Unit price
- per
- Choosing a selection results in a full page refresh.