Free economy shipping on all orders
Our policy lasts for a period of 14 DAYS. Kindly note that if 14 days have passed since your date of receiving the package, our team will not be held liable for it and thus cannot help with refunds and exchanges.
E-Fast 7 Stages Touch Screen LCD Display 12V 6A 24V 3A Car Motorcycle Lead Smart Battery Memory Function Charging Repair Charger Adaptor Lithium Battery Lead-Acid Agm Gel Wet Lifepo4 Batteries EU US AU UK Plug Yellow
Description:
7-Stages Microprocessor Controlled Charging |
This 7-stage microprocessor controlled charging process provides the finest possible application and enables efficient battery charging, and the efficiency is >85%. |
4 Battery Usage Modes |
4 battery usage modes,LITHIUM(12.6V24V ternary lithium battery mode)LEAD(car mode)LifePO4(12.8V24V FE LI motorcycle mode)REPAIR(repair mode) |
LCD Display Touch Screen |
Equipped with LCD display, shows the c-harger inside temperature, charge voltage, charge current, desulphation mode, test mode, repairing mode, battery capacity and etc. |
Equipped With Winter/Summer Mode |
Equipped with winter mode(when the ambient temperature is below+10℃, raise the charge voltage) and summer mode(when the ambient temperature is above +28℃, reduce the charge voltage). |
Other Advantages |
l The outer is made of ABS material, insulation, flameretardant, high temperature. l Freeze-resistant soft copper core line, with full coverage alligator clip, solid and practical. l Stable output, high conversion rate, energy saving, large capacity, etc. l Charging voltage adapts to temperature to prevents over or under battery charging. l The charger can be used to check if the battery is seriously damaged. l Capable of recharging severely discharged or heavily sulfated battery. l Reverse polarity protections, short circuit protections, over charge protections, parks free contact. l Ease of use, clear charging status display. l Full microprocessor controlled. l Does not over charger your battery even if it is kept connected in any mode. |
Specification:
Name |
Barrery Charger |
Material |
ABS |
Voltage Input |
AC 100-240V, 50-60Hz |
Output voltage |
12V/24V Auto |
Output current |
12V, 6A & 24V, 3A |
Minimum starting voltage |
8.0V |
Battery range |
6-120AH |
Thermal protection |
65'C +/ -5 'C |
Efficiency |
Applications.85% |
Meet the standards |
CB, CE, IEC60335, EN61000, EN55014 |
Size (length × width × height) |
160×100×55mm |
Weight |
450g |
Switching mode technology |
Yes |
Polarity protection |
Yes |
Output short circuit protection |
Yes |
Non-battery link protection |
Yes |
Overvoltage protection |
Yes |
Overheating protection |
Yes |
Package Included:
1 X |
Barrery Charge Device |
1 x |
Introduction |
Thanks for subscribing!
This email has been registered!