Nitro OBD2 Benzine Yellow Economy Chip Tuning Box Power Fuel Optimization Device
According to your driving habits, NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car.
As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.
Nitro OBD2 find the hidden power of your car.
Up to 35% more power
Up to 25% more torque
|| Nitro OBD2 Benzine
|| 12 (V)
| Working temperature
|| 0-60 (℃)
Installation and Calibration:
1 Pull the car ignition key.
2 Find OBD2 connector in your car and plug EcoOBD2
3 Insert the key in the ignition and turn the key to the first stage. (Do not start the car)
4 Press the reset button for about 5 seconds. After releasing the button, just wait for a while about 30-54 sec. (EcoOBD2 communicate and connect with ECU)
5 Starting the engine.
6 EcoOBD2 recognize your car and your driving habits, after about 200 km / 150 miles of driving and therefore EcoOBD2 adjusted to match perfectly to your car's fuel economy.
OBD2 necessarily for cars:
- Sold after January 1, 1996 in the USA
- Sold after January 1, 2001 in the European Union
Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering column,
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.
1 X Nitro OBD2 Chip Tuning Box Interface